全自動鎖蓋機 ARC-1
自動整蓋 --> 下蓋 --> 鎖蓋
瓶子高低可調整適合多瓶種使用。
規格: 寬0.92公尺 x 高1.6公尺 x 輸送帶長度3公尺重量約450kgs
適用於: 鋁蓋、梅花蓋、安全蓋、塑膠蓋、王五爪蓋、鍍金蓋
Fully automatic cover locking machine ARC-1
Automatic cover alignment-->remover cover --> lock cover
The bottle height can be adjusted.
Specification: W0.92m x H1.6m x conveyer belt length 3m ,Weight: about 450kgs
Applicable: Aluminum cover, plum flower cover, safety cover, plastic cover, 5-paw cover,
  gold-galvanized cover.

全自動液體充填機 AFE-6
每分鐘10-60瓶,容量大小可調整(視充填量多寡及瓶口孔徑大小而訂)
液面接觸材質為不袗符合GMP
規格: 寬0.92公尺x高1.6公尺x輸送帶長度3公尺重量約400kgs
適用於: 牛奶、醬油、豆漿、洗髮精、礦泉水、清純奶精、機油、米漿、沐浴乳、果汁健康飲料
  、食品添加劑、羊乳、食用油、杏仁、保養品乳液、調味劑、酒。
Fully automatic liquid filling machine AFE-6
10~60 tons per minute with adjustable capacity.
Liquid contact material is stainless steel, conforming to G.P.
Specification: W0.92m x h1.6m x conveyer belt length 3m , Weight: about 400kgs.
Applicable: milk, soy sauce, bean milk, shampoo, mineral water, juice health drink, cream,
lubricant, rice milk,bathing lotion, detergent, food additive, gout milk, food oil,
  almond maintenance item, teste mixture, lotion.


全自動高黏度液體充填旋蓋機
FB-6
充填方面: 主機寬至1公尺,長度1公尺,填充量〈1〉100㏄∼1000㏄ 〈2〉1000㏄∼2000㏄可調整
  馬力2HP,每分鐘瓶(視充填物品質而定),塑膠瓶及玻璃瓶皆可。充填嘴口本身視
產品需要量而定,單嘴或多嘴口選擇。
RC-1
旋蓋方面: 主機長度及寬度為0.8至1公尺,馬力1HP,扭力快慢可調整。全自動整蓋、上蓋、旋蓋,
  塑膠蓋、鋁蓋或鍍金鋁蓋皆可。
  包裝速度:可視機械本身的包裝物與材料而定,可選擇加裝其它的設備。
  全機外殼不袗符合GMP
  特殊構造亦可訂製
適用於:
機油、化妝保養品、洗髮專用品、食品油、食品添加劑等。
Speification of fully automatic filling and cap turning machine for highly viscous liquid
FB-6
Filling Section: Main machine's width is 0.8 to 1 meter and its length 1 meter. The filling
  quantity is 100c.c.-1,000c.c. which is adjustable. Its horse powers are 2 HP
  . it can fill 20-60 bottles per minute depending upon the nature of the filling
  material. The bottle may either be made up of plastic or glass, which is
  suitable for filling purpose of the machine, The chuting mouth for filling
  purpose depends upon the requirement of the product, either in single
  mouth type or multiple mouth type.
milk, soy sauce, bean milk, shampoo, mineral water, juice health drink, cream,
Cap turning section: Main machine is 0.8 to 1meter in width, and 1 meter in length. The fast or
  slow motion of its torque is adjustable. The loading, turning or adjustment
  of cap is carried out in full automatic way. Any plastic, aluminum or
  aluminum cap which has been gold plated is applicable to the machine.
  Packing speed:it is determined by the packing contents with the machine
  and packing material. The user may select other auxiliary equipments to
  the machine.
  Machine's outer housing agrees with GMP
  Special Structure is available in production under custom order.
It is applicable to the use of machine oil, cosmetic maintenance product, shampoo specialty,
edible oil, and food additive etc.


全自動液體充填鋁箔鎖蓋機
特性: 1. 多種組合、全自動流程、填充量100㏄±1∼1000㏄±3可調整,每分鐘20∼60瓶,塑膠瓶及玻璃瓶皆可。
2. 鋁箔封口系列:自動成型,自動加熱封口一次完成。
3. 自動整蓋瓶蓋扭力鎖緊後自動停止,保證不損傷瓶蓋。
4. 一貫系列、美觀大方、操作簡單明瞭,填充量精準度高。
 其過程可:
(一)各自獨立操作。
(二)全自動整體控制。
適用於: 高黏度(或有顆粒)、油類、乳類、化工、乳液、洗髮保養品等……。
主機: 高度(H):750∼820㎜可調整 馬力:3Hp
長度(L):1510㎜ 附凹型槽,不外漏
寬度(W):910㎜
輸送帶長度:3∼4米 馬力1/8HP
重量:約700KGS
出口集瓶轉盤 直徑600㎜ 馬力1/8 HP
入口集瓶轉盤 直徑600㎜ 馬力1/8
HP
充填機編號:(FE-2)
鋁箔機編號:(MS-3)
鎖蓋機編號:(RC-1)

Features:
1.
Multiple kinds of combination Fully Automatic flow 20~60 capsules per minute, applicable both to plastic bottle and glass bottle.
2.
Aluminum membrane sealing series: Automatic formation, Automatic heating sealing, to be completed at once.
3.
Automatic cover arrangement, bottle cover torque will be automatically stopped after it is tightly locked, guaranteed without damage to a bottle cover absolutely.
4.
A through series, beautiful and commonly acceptable, simple and easily understood operation; its process may (1) be independently operated individually, (2) fully automatic control on an overall basis.
Applicable to liquid:
in high viscosity (or with particle), oil kind, milk kind, chemical engineering, lotion, shampoo maintenance items, etc.
Mainframe:
(H): 750~820m/m adjustable HP:3HP
(L): 1510m/m (W): 910m/m Accessed with concave tank, no leakage
Conveyor belt length: 3~4m
Weight: at about 700kgs
Outlet bottle gathering disc diameter 600m/m 1/8HP
Inlet bottle gathering disc diameter 600m/m 1/8HP

永懋精機工業有限公司
桃園縣龜山鄉龍校街121巷2弄6號(近新莊迴龍)
TEL:(03)3203456
FAX:(03)3204849
YUNG MAW PERFECT MACHINE INDUSTRY CO., LTD.
NO.6, ALLEY 2, LANE 121, LONG HSIAO STREET, GUEI
SHAN HSIANG, TAOYUAN HSIEN, TAIWAN, R.O.C.
TEL:(03)3203456
FAX:(03)3204849